Hydraulic Tools

 

Hydraulic bushing tool kit EBH-series


The EBH hydraulic tool kit is used for a wide variety of applications in car and truck workshops worldwide.                                           Working with EBH to replace bushings, axles and bearings is easy and saves time.
In many cases the amount of strip-down preparation is reduced and the need to take the part to a workshop press eliminated.         Instead you can work with the hydraulic tool kit directly on the vehicle.

Shown on picture:  EBH-13

EBH-13
ModelCapacity
Ton

Video

EBH-66Video
EBH-1313 Video
EBH-1818 Video
EBH-2727 Video
EBH-3737 Video



 



Image of Hydrau36

Hydraulic side and end cutters

Hydraulic side and end cutters can be used e.g. for cutting rebar, bolts, wire, rivets, nuts and so on.

SIDE CUTTERS
Model 369 are aimed for cutting flat and hard materials.

ModelMax. cutting force
(kN)
Max working pressure (bar)Material
ø mm
Hardness
HB
Tensile strenght
N/mm2
Weight
kg
3691407009, 16, 21450, 250, 2001550, 850, 7006,7


END CUTTERS
Thanks to the special shape of the cutting head, model HCE25 can be used for cutting rivets, nuts and bolts. Always when it comes to cutting small objects or where the cutting surface is limited.

ModelMax. cutting force
(kN)
Max. working pressure
(bar)
Material
ø mm
Hardness
HB
Tensile strenght
N/mm2
Weight kg
HCE25907006, 9, 13450, 230, 1101500, 800, 4007,4

We recommend to use the air/hydraulic pump modell PP70-1000/LS201 with these tools.
 




Nut splitter - Simson


Image of Hydrau53

Thanks to the ingenious design our nut splitter can be used to solve a number of varying problems. 
■ Simson nutsplitter is to be used for disjointing rusty or damaged nuts.
■ The nutsplitter is an exceptional tool to be used in environments where flame-cutting is hazardous. Furthermore, by using the right size of splitter no damage on bolts will occur. ■ Very high level of working security. 
■ The nutsplitter has a built-in spring return.

ModelNut size mmBolt Ø mmLxWxH mmWeight
NS131913-196-11200x40x480,8
NS192419-2411-14227x55x712,0
NS243224-3214-19260x66x763,0
NS324132-4119-25286x75x894,4
NS415041-5025-32325x96x1098,2
NS506050-6032-38366x106x12611,8
NS607560-7538-48367x156x18034,1



Nut splitter  - Equalizer
NS15TE-on-white


  • Optimised Cutting head geometry
  • Heat-Treated Shock Resistant Tool Steel Cutting Tip
  • Quick and easy Cutting Tip replacement
  • Integrated steel shroud encloses cutting zone protecting against flying particles
  • Drop-tested revolving anchor point
  • High-strength safety bond
ModelNut size mmBoltKit size LxWxH mmKit weight
NS12TE17,5-30M12-M20360x300x1005,0
NS15TE23-36,5M16-M24360x330x1005,5
NS20TE32-51M24-M33360x330x1006,7
NS36TE50,8-65M33-M42580x360x20013,6
NS50TE65-80M45-M52580x360x20019,5
NS75TE79,4-100M56-M68 TBC TBC
NS100TE98,4-115M72-M80 TBC TBC

 


Nut splitter  - EqualizerNS15TI

 
  • Integral Hydraulic Pump
  • Ideal for working at heights or subsea applications
  • No need for hoses, separate hand-pumps or couplings
  • Optimised Cutting head geometry
  • Heat-Treated Shock Resistant Tool Steel Cutting Tip
  • Quick and easy Cutting Tip replacement
  • Integrated steel shroud encloses cutting zone protecting against flying particles
  • Drop-tested revolving anchor point
  • High-strength safety bond
ModelNut size mmBoltKit size LxBxH mmKit weight
 
NS12TI17,5-30M12-M20TBC5,7
NS15TI23-36,5M16-M24TBC6,2
NS20TI32-51M24-M33360x330x1007,5

 


Vertical lifting wedge - Equalizerbilde

The VLW18TE Vertical Lifting Wedge uses an external hydraulic hose & hand pump allowing the tool to be operated a short distance away.

The VLW18TI Integral Vertical Lifting Wedge has a built in hydraulic pump allowing the tool to be used in confined areas. The sealed Integral hydraulic pump design allows the tool to be used either above or below water.



Youtube_logo-Update-Hints
 

VLW18TE Mini Kit

VLW18TE Standard Kit

VLW18TE Maxi Kit

vlw18temin-kit-border_249x177vlw18testd-kit-border_249x173vlw18temax-kit_249x195
Kit components:

1 x VLW18TE Wedgehead
1 x 700 bar Hydraulic Cylinder
1 x Safety Block
1 x Stepped Block
1 x Hex Key
1 x Countersunk Screw
1 x Instruction Manual
 
Kit components:

1 x VLW18TE Wedgehead
1 x 700 bar Hydraulic Hose, 2m 
1 x 700 bar Hydraulic Cylinder
1 x 700 bar Hand Pump with Gauge
1 x Safety Block
1 x Stepped Block
1 x Hex Key
1 x Countersunk Screw
1 x Instruction Manual
1 x Carry Case 
Kit components:

2 x VLW18TE Wedgehead
2 x 700 bar Hydraulic Hose, 2m
2 x 700 bar Hydraulic Cylinder
1 x 700 bar Hand pump with Gauge
2 x Safety Block
2 x Stepped Bloc
2 x Hex key
2 x Countersunk Screw
1 x Instruction manual
1 x Carry Case

 

  

VLW18TI

vlw18ti-kit-border-1_249x198
Kit components:

1 x VLW18TI Wedgehead
1 x 700 bar Integral Hydraulic Pump/Cyl
1 x Safety Block
1 x Stepped Block
1 x Hex Key
1 x Countersunk Screw
1 x Instruction Manual
1 x Carry Case
 


ModelCapacity (Ton)Max. Working Pressure
(bar)
Max. Lifting Height mmWeight kg
VLW18TE - Mini18700559
VLW18TE - standard187005515
VLW18TE - Maxi187005524
VLW18TI18700558

 



Hydrauliske løftekiler - RehobotImage of Hydrau38

Hydraulic spreaders can be used to pry apart, press, widen or lift where space is limited or the opening is narrow. The tool can be used within many different areas such as mechanical workshops and building industry for maintenance and repair, civil and military rescue services etc.

• Lifting machines or other heavy constructions.
• Prying loose stuck objects.
• Open closed doors.
• Fasten objects.
• Press profiles apart.

Models ESH10 and CS20-120
These models have a built-in cylinder and one moving jaw equipped with return spring.
Besides that, the spreaders are equipped with a hydraulic quick coupling and are ready for use with a hydraulic pump.

ModelCapacity (kN)Max. Working Pressure
(bar)
Max. Lifting Height mmWeight kg
ESH109700901,8
CS20-120208001204
EHS16-5901570059015,4





Hydrauliske avdragereImage of Hydrau51

REHOBOT hydraulic pullers are designed for tough industrial applications and
are available in sizes from 5 ton to 44 ton.

The rugged design will make this a work-horse for many years to come. The benefits of a hydraulic puller, compared with a mechanical one, are many; the most important is a non rotating piston / press head.
This allows the user to carry out the pull safely without the risk of slipping.

• Rugged design.
• Safe and stable pull operations as piston is non rotating.
• Self straining.

The smaller sizes, 5 ton and 10 ton, are equipped with special mechanics which self centers the arms.
The arms will therefore always adapt to the diameter of the object and have the best possible grip and handling. All REHOBOT pullers are furthermore self straining and have an extra long stroke. The pull depth can easily be adjusted by moving the arm attachments.

The pullers can be used with 2 or 3 arms (except for AH450 - only 3 arms). Different lengths of arm are available as accessories.

Choose a suitable pump kit - all REHOBOT pumps fit our pullers but we recommend either our PHS70-1000/LS201 kit or rather the air driven foot pump type PP70A-1000/LS201. Both types are equipped with a 2 m hose, a swivel and a REHOBOT quick coupling.

They are also sold as stand alone units without the hydraulics; A50, A110, A200 and A450 - if the user already has a suitable cylinder.

Two additional accessory kits are available:
• PK50 - Pin- knife puller kit 5 T (for ø22mm - ø115mm)
• PK110 - Pin- knife puller kit 10 T (for ø25mm - ø155mm)


Video
 

ModelCapacity ton (kN)Max. Working Pressure
(bar)
Stroke mmMax. Opening mmWeight kg
AH505 (49)7002002505,9
AH11011 (110)70030040014,4
AH20023 (228)70030050038
AH45045 (440)70020068066