Calibration equipment for torque tools




Torque tester - Trucheck PLUS (0,1-25Nm)

 
Torque tester for torque screwdrivers and small torque wrenches from 0,1Nm up to 25Nm.
688814%26width%3D1104%26height%3D630%26zwidth%3D11
Approved as test and internal certification instrument. 
Accuracy: +/- 1%
The instrument has a single LED display
Torque units: Nm, lbf.ft and lbf.in
 
Trucheck Plus has an RS-232 output and comes complete with an RS-232 cable. 
The reading measurement unit and limit status (Low,OK and High) are output via RS-232.
Instrument can be recalibrated in our laboratory in Norway.
 
Supplied with carry case
 
Youtube_logo-Update-Hints



ModelTorque rangeAC/DC
TruCheck Plus 30,1 - 3 Nm220 V AC
TruCheck Plus 101 - 10 Nm220 V AC
TruCheck Plus 251 - 25 Nm220 V AC



 

Torque tester- TruCheck Plus (35-2000Nm)

 Torque tester for torque screwdrivers and small torque wrenches from 35Nm up to 2000Nm.
 
Approved as test and internal certification instrument. 688816%26width%3D1677%26height%3D1215%26zwidth%3D1
Accuracy: +/- 1%
The instrument has a single LED display
Torque units: Nm, lbf.ft and lbf.in
 
Trucheck Plus has an RS-232 output and comes complete with an RS-232 cable. 
The reading measurement unit and limit status (Low,OK and High) are output via RS-232.
 
Instrument can be recalibrated in our laboratory in Norway.
 
Supplied with carry case

Youtube_logo-Update-Hints

 
 
ModelTorque rangeAC/DC
TruCheck Plus 35035 - 350 Nm220 V AC
TruCheck Plus 1000100 - 1000 Nm220 V AC
TruCheck Plus 2000200 - 2000 Nm220 V AC




 
 
 

Torque tester - ProTest

 
Torque tester for manual torque tools up to 1500Nm301420%26width%3D312%26height%3D394%26zwidth%3D312
 
Approved as a test and internal certification instrument
under BS7882:2008 and ISO EN 26789
 
Accuracy: +/- 0.5%
 
User can select the language they wish to work in (most European languages are included)
 
All common torque units are included.
 
RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC software etc. 
 
Instrument can be recalibrated in our laboratory in Norway.
 
Supplied with carry case
 
Youtube_logo-Update-Hints 
 
ModelTorque rangeAC/DC
Pro-Test 601,2 - 60 N·m220 V AC
Pro-Test 4008 - 400 N·m220 V AC
Pro-Test 150030 - 1500 N·m220 V AC


 

Torque tester - TST instrument

 
The TST combines simplicty with up to date technology to provide a high quality instrument for the testing and
calibration of low capacity torque tools. Featuring an internal transducer complete with Joint Simulation Rundown Assembly. 

The TST is available in 3 torque ranges: 0.04 to 2Nm, 0.5 to 10Nm and 1.25 to 25Nm.
Class 1 system acuracy over its Primary range (+-0.5% of reading from 20% to 100% of full scale)
 
What makes the TST genuinely versatile is the interface for an external transducer.208711%26width%3D350%26height%3D265%26zwidth%3D350 Accessed by a 2 way switch.
 
Limit detection with low, pass and fail indication. Up to 12 target values can be set.
 
RS-232-C serial data interface for connection to a printer or PC.
Continous RS 232 output when used in track mode (up to 11 reading per sec)
 
Test instrument for static & dynamic transducers. 
 
Supplied with carry case
 
ModelTorque range (internal transducer)
TST 20,04 - 2 N·m
TST 100,5 - 10 N·m
TST 251,25 - 25 N·m



 

TTT instrument

 
The TTT shares all of the extensive features of the TST ecpect that it has no internal transducer.
Instead the TTT offers not one but three external transducer interfaces allowing any three transducers to be
simultaneously connected. Selection between the transucers is made by a roatary switch at the back of the 
instrument case.
208713
 
Limit detection with low, pass and fail indication. Up to 12 target values can be set.

 
RS-232-C serial data interface for connection to a printer or PC. Continous RS 232 output when used in track mode (up to 11 reading per sec)
 
Test instrument for static & dynamic transducers. 
 
Supplied with carry case
 




 
 

T-BOX XL

 
The T-Box XL togheter with Norbars Torque Data Management System (TDMS) software provides the complete solution
for torque tool calibration, data logging and data management and archiving on your PC. 
 
The T-BOX XL features a ''Pulse Tool Mode'' wich uses a mathematical algorithm to accurately determine the output torque from Impulse tools. Can connect up to 4 Smart Transducers including transducers with angle capabilities for instant connectivity. 
  
794252%26width%3D344%26height%3D344%26zwidth%3D342
 




2 USB ports, 1 RS232 serial port and an ancillary connection. 

Touch screen LCD display with graphic on screen icons for simple tool selection. 
 
T-Box XL comes pre-loaded with Tool Templates for the entire Norbar product range of Torque Wrenches, Pneutorques and EvoTorques enabling the user to simply
assign individual tools to perform calibration to the relevant ISO standard.
Other tool templates can be created by the operator.
 
 
 


 

TTL-HE (Hars Environment)

 
 
Particulary suited for use in the Offshore and Power Generaion industries, the combination of high quality components, sound desing and many years field experience allow calibration and control in previously restrictive areas. 
Limit indication.
 
Rated to IP65/IP67 the products are aimed specifically for use in hars enviroments.
The IP65/IP67 rating gives the product protection against dust ingeression, pressurised water jet and complete water immersion to a 1 metre depth for a 30 minute period.
301419
 
Up to 8 target values can be set. 
 
RS-232-C serial data interface for connection to a printer or PC. 
Continous RS 232 output when used in track mode (up to 11 reading per sec)


Test instrument for static & dynamic transducers.